Show Debug - Extreme Networks ExtremeWare XOS Command Reference Manual

show debug

show debug
Description
This command displays the status of writing core dump files to the specified memory card.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
By default, the switch does not write core dump files to the memory card. Use the this command to
verify if you are writing core dump files to the memory card.
To configure the Summit X450 switch to write core dump files to the internal memory card, use the
configure debug coredumps internal-memory
core dump files to the external memory card, use the
command.
Example
The following example shows if the switch is sending core dump files to the specified memory card:
show debug
The following sample output shows that the switch is not sending core dump files to the specified
memory card:
Debug Settings:
Core dumps: Disabled
Modular Switches Only. The following sample output shows that the switch is sending core dump files
to the external memory card:
Debug Settings:
Core dumps: Enabled (memorycard)
Summit X450 Switch Only. The following sample output shows that the switch is sending core dump
files to the internal memory card:
Debug Settings:
Core dumps: Enabled (internal-memory)
ExtremeWare XOS 11.3 Command Reference
command. To configure a modular switch to write
configure debug coredumps memorycard
show debug
1675