Extreme Networks ExtremeWare XOS Command Reference Manual page 1633

install image
After failover is complete, download the software to the new backup MSM. Again, if you download the
image to the inactive partition, use the
install image <fname> {<partition>} {msm <slotid>}
command to install the software image at a later time.
{reboot}
For more detailed information about hitless upgrade, see the command.
download image
Example
The following command installs the software image file bd10K-11.1.0.20.xos on a BlackDiamond 10K
switch:
install image bd10K-11.1.0.20.xos
The following command installs the software image file bd8800-11.3.0.10.xos on a BlackDiamond 8810
switch:
install image bd8800-11.3.0.10.xos
The following command installs the software image file summitX450-11.2.0.16.xos on a Summit X450
switch:
install image summitX450-11.2.0.16.xos
History
This command was first available in ExtremeWare XOS 10.1.
The parameter was added in ExtremeWare XOS 11.1.
msm
Platform Availability
This command is available on all platforms.
1633
ExtremeWare XOS 11.3 Command Reference