Permit Interface - HP Enterprise FlexFabric 12900E Series Command Reference Manual

Any change to a user role interface policy takes effect only on users who log in with the user role after
the change.
Examples
# Enter user role interface policy view of role1, and deny role1 to access any interfaces.
<Sysname> system-view
[Sysname] role name role1
[Sysname-role-role1] interface policy deny
[Sysname-role-role1-ifpolicy] quit
# Enter user role interface policy view of role1, and deny role1 to access any interfaces except for
HundredGigE 1/0/1 to HundredGigE 1/0/4.
<Sysname> system-view
[Sysname] role name role1
[Sysname-role-role1] interface policy deny
[Sysname-role-role1-ifpolicy] permit interface hundredgige 1/0/1 to hundredgige 1/0/4
Related commands
display role

permit interface

role
permit interface
Use
permit interface
Use
undo permit interface
Syntax
permit interface interface-list
undo permit interface [ interface-list ]
Default
No permitted interfaces are configured in user role interface policy view.
Views
User role interface policy view
Predefined user roles
network-admin
Parameters
interface-list
specifies one interface in the
interfaces
interface-number
following requirements:
•
Be the same type as the start interface.
•
Have a higher interface number than the start interface.
to configure a list of interfaces accessible to a user role.
: Specifies a space-separated list of up to 10 interface items. Each interface item
interface-type interface-number
in the
interface-type
form. If you specify an interface range, the end interface must meet the
to disable the access of a user role to specific interfaces.
interface-number
27
form or a range of
to interface-type