Need Only A Quick Start; Ip Addressing - HP ProCurve Switch 2900yl-24G Access Security Manual

Getting Started

Need Only a Quick Start?

1-8
If you need information on specific features in the ProCurve Web Browser
Interface (hereafter referred to as the "web browser interface"), use the online
help available for the web browser interface. For more information on web
browser Help options, refer to "Online Help for the ProCurve Web Browser
Interface" in the Management and Configuration Guide.
If you need further information on ProCurve switch technology, visit the
ProCurve Networking Web Site at:
www.procurve.com

Need Only a Quick Start?

IP Addressing

If you just want to give the switch an IP address so that it can communicate
on your network, or if you are not using VLANs, ProCurve recommends that
you use the Switch Setup screen to quickly configure IP addressing. To do so,
do one of the following:
Enter setup at the CLI Manager level prompt.
■
Procurve# setup
In the Main Menu of the Menu interface, select
■
8. Run Setup
For more on using the Switch Setup screen, see the Installation and Getting
Started Guide you received with the switch.