Ead Fast Deployment Configuration Commands; Dot1X Free-Ip; Dot1X Timer Ead-Timeout - HP 6125G Command Reference Manual

EAD fast deployment configuration commands

dot1x free-ip

Syntax
dot1x free-ip ip-address { mask-address | mask-length }
undo dot1x free-ip { ip-address { mask | mask-length } | all }
View
System view
Default level
2: System level
Parameters
ip-address: Specifies a freely accessible IP address segment, also called "a free IP."
mask: Specifies an IP address mask.
mask-length: Specifies IP address mask length.
all: Removes all free IP addresses.
Description
Use dot1x free-ip to configure a free IP. Users can access the segment before passing 802.1X
authentication.
Use undo dot1x free-ip to remove the specified or all free IP addresses.
By default, no free IP is configured.
When global MAC authentication, or port security is enabled, the free IP does not take effect.
Related commands: display dot1x.
Examples
# Configure 192.168.0.0/24 as a free IP address.
<Sysname> system-view
[Sysname] dot1x free-ip 192.168.0.0 24

dot1x timer ead-timeout

Syntax
dot1x timer ead-timeout ead-timeout-value
undo dot1x timer ead-timeout
View
System view
Default level
2: System level
112