Display Line - HP Enterprise FlexFabric 12900E Series Command Reference Manual

display line

Use
display line
Syntax
display line [ number1 | { aux | vty } number2 ] [ summary ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
: Specifies the absolute number of a user line. The value range is 0 to 159.
number1
: Specifies the AUX line.
aux
: Specifies the VTY line.
vty
: Specifies the relative number of a user line. The value range is 0 to 31 for AUX lines and
number2
0 to 127 for VTY lines.
summary : Displays summary information about user lines. If you do not specify this keyword, the
command displays detailed information.
Examples
# Display information about line 0.
<Sysname> display line 0
Idx Type
F 0 AUX 0
+ : Line is active.
F : Line is active and in async mode.
Idx : Absolute index of line.
Type : Type and relative index of line.
Auth : Login authentication mode.
Int : Physical port of the line.
A : Authentication use AAA.
N : No authentication is required.
P : Password authentication.
Table 8 Command output
Field
Modem
Int
Location
# Display summary information about all user lines.
to display user line information.
Tx/Rx Modem Auth
9600 -
Description
Whether the modem allows calling in or out. By default, this attribute is not configured and
this field displays a hyphen (-).
This field is not supported in the current software version.
Physical port for the line. If there is no physical port for the line or the port is a console port,
this field displays a hyphen (-).
Physical position of the line, in the form of slot number/CPU number.
Int Location
N - 1/0
52