Dpvm Database Diff - Cisco MDS 9124 - Fabric Switch Reference

Chapter 5 D Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

dpvm database diff

To display the active dynamic port VSAN membership (DPVM) database, use the dpvm database diff
command.
Syntax Description active
config
Defaults Deactivated.
Command Modes
Configuration mode.
Command History Release
2.0(x)
Usage Guidelines To use this command, DPVM must be enabled using the dpvm enable command.
Examples The following example displays the differences in the DPVM active database when compared with the
DPVM config database.
switch# dpvm database diff active
Legend: "+" New Entry, "-" Missing Entry, "*" Possible Conflict Entry
---------------------------------------------------------------------
- pwwn 44:22:33:44:55:66:77:88 vsan 44
* pwwn 11:22:33:44:55:66:77:88 vsan 11
The following example displays the differences in the DPVM config database when compared with the
DPVM active database.
switch# dpvm database diff config
Legend: "+" New Entry, "-" Missing Entry, "*" Possible Conflict Entry
---------------------------------------------------------------------
- pwwn 44:22:33:44:55:66:77:88 vsan 44
* pwwn 11:22:33:44:55:66:77:88 vsan 11
OL-16217-01, Cisco MDS SAN-OS Release 3.x
dpvm database diff {active | config}
Displays differences in the DPVM active database compared to the DPVM
config database.
Displays differences in the DPVM config database compared to the DPVM
active database.
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
dpvm database diff
5-43