Cisco MDS 9124 - Fabric Switch Reference page 324

dir
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
dir
To display the contents of the current directory or the specified directory, use the dir command in EXEC
mode.
Syntax Description bootflash:
debug:
log:
modflash:
slot0:
module
filename-or-directory
volatile:
Defaults
The default file system is specified by the cd command.
Command Modes EXEC mode.
Command History Release
1.2(1)
2.1(1a)
Usage Guidelines None.
Examples
The following example shows how to list the files on the bootflash directory.
switch# dir bootflash:
40295206
12456448
12288
27602159
12447232
28364853
Cisco MDS 9000 Family Command Reference
5-26
dir [bootflash:module | directory-or-filename | debug:directory-or-filename | log:module |
directory-or-filename | modflash:module | directory-or-filename | slot0:directory-or-filename |
volatile:module | directory-or-filename]
(Optional) Flash image that resides on the supervisor module.
(Optional) Provides information about the debug capture directory.
(Optional) Provides information about the two default logfiles. The file
dmesg contains the kernel log-messages and the file messages contains the
system application log-messages.
(Optional) Provides information about the flash image that resides in a
module flash file directory.
(Optional) Flash image that resides on another module.
(Optional) Module name and number.
(Optional) Name of the file or directory to display on a specified device. The
files can be of any type. You can use wildcards in the filename. A wildcard
character (*) matches all patterns. Strings after a wildcard are ignored.
Flash image on the volatile file system.
Modification
This command was introduced.
Added debug, log, and modflash keywords.
Aug 05 15:23:51 1980
Jul 30 23:05:28 1980
Jun 23 14:58:44 1980
Jul 30 23:05:16 1980
Aug 05 15:08:30 1980
Aug 05 15:11:57 1980
ilc1.bin
kickstart-image1
lost+found/
system-image1
kickstart-image2
system-image2
Chapter 5 D Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x