Show Sntp Status - Dell PowerConnect 6024F Command Line Interface Reference Manual

Server
----------
10.1.1.91
Broadcast Clients: Enabled
Anycast Clients: Enabled
Broadcast and Anycast Interfaces: g1, g3

show sntp status

The show sntp status privileged EXEC command shows the status of the Simple Network Time
Protocol (SNTP).
Syntax
show sntp status
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
ExamSples
The following example shows the status of the SNTP.
Console# show sntp status
Clock is synchronized, stratum 4, reference is 176.1.1.8, unicast
Reference time is AFE2525E.70597B34 (00:10:22.438 PDT Jul 5 1993)
Unicast servers:
Server
---------
176.1.1.8
176.1.8.179
Status Last response
------ ---------------
Up 19:58:22.289 PDT Feb 19 2005
Unknown 12:17.17.987 PDT Feb 19 2005
Polling
--------
Enabled
Encryption Key
-----------------
9
Offset
[mSec]
-----
7.33
8.98
Delay
[mSec]
------
117.79
189.19
113
Clock