Show Sntp Status - Dell PowerConnect 5424 Command Line Interface Manual

show sntp status

The show sntp status Privileged EXEC mode command shows the status of the Simple Network Time
Protocol (SNTP).
Syntax
• show sntp status
This command has no keywords or arguments.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Examples
The following example shows the status of the SNTP .
Console# show sntp status
Clock is synchronized, stratum 4, reference is 176.1.1.8
Reference time is AFE2525E.70597B34 (00:10:22.438 PDT Jul 5 1993)
Unicast servers:
Server
---------
176.1.1.8
176.1.8.179
Broadcast:
Interface
---------
176.1.1.8
176.1.8.179
138
Clock
Preference Status
---------- ------
Primary Up
Secondary Unknown
IP address Last response
---------- ------------------------
Primary AFE252C1.6DBDDFF2
Secondary AFE21789.643287C9
Last response
---------------
AFE252C1.6DBDDFF2
AFE21789.643287C9
Offset Delay
[mSec] [mSec]
----- ------
7.33 117.79
8.98 189.19