Table 67: Show Secure Classifier-List Output Fields; Monitoring Secure Clacl Configurations - Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE V11.1.X Configuration Manual

Monitoring Secure CLACL Configurations

Display information about only secure CLACL configurations. This command and
Purpose
the output are visible only to authorized users the mirror-enable command must
be enabled before using this command. Use the brief or detail keywords with the
show secure classifier-list command to display different levels of information.
To display a list of secure CLACLs
Action
host1#show secure classifier-list
Secure IP secClassA.1 ip any any
Secure IP secClassB.1 ip any not 10.10.10.1 255.255.255.255
Secure IP secClass25.1 user-packet-class 8 source-route-class 100 ip
192.168.44.103 255.255.255.255 any
Displays details of each secure CLACL
host1#show secure classifier-list secClass25 detailed
Secure IP Classifier Control List secClass25
Table 67 on page 271 lists show secure classifier-list command output fields.
Meaning

Table 67: show secure classifier-list Output Fields

Classifier Control List Table
---------- ------- ---- -----
Classifier Control List Table
---------- ------- ---- -----
Reference count: 0
Entry count: 1
Classifier-List secClass25 Entry 1
User Packet Class:
Source Route Class:
Protocol:
Not Protocol:
Source IP Address:
Source IP WildcardMask:
Not Source Ip Address:
Destination IP Address:
Destination IP WildcardMask:255.255.255.255
Not Destination Ip Address: false
Field Name
Reference count
Entry count
Classifier-List
Entry
Color
Protocol
Chapter 14: Monitoring Packet Mirroring
8
100
ip
false
192.168.44.103
255.255.255.255
false
0.0.0.0
Field Description
Number of times the CLACL is referenced by policies
Number of entries in the classifier list
Name of the classifier list
Entry number of the classifier list rule
Packet color to match: green, yellow, or red
Protocol type
Monitoring Secure CLACL Configurations
271