Table of Contents
Advertisement
mask destination
mask source
Monitoring J-Flow Statistics
Clearing J-Flow Statistics
clear ip flow stats
J-Flow show Commands
Copyright © 2010, Juniper Networks, Inc.
Use to set the minimum mask size for the destination address for the prefix and
destination prefix aggregation caches.
Example
host1(config-flow-cache)#mask destination 128
Use the no version to restore the default mask size, which is 0.
See mask destination.
Use to set the minimum mask size for the source address for the prefix and source
prefix aggregation caches.
Example
host1(config-flow-cache)#mask source 60
Use the no version to restore the default mask size, which is 0.
See mask source.
This section shows how to clear J-Flow statistics and use the show commands to view
J-Flow settings and statistical results.
Use the clear ip flow stats command to clear all entries from all flow caches on the
virtual router.
Use to clear entries from all flow caches on the VR/VRF.
Example
host1(config)#clear ip flow stats
There is no no version.
See clear ip flow stats.
You can monitor the following aspects of J-Flow statistics by using the following
commands:
To Display
Main cache flow operational statistics
Chapter 3: Configuring J-Flow Statistics
Command
show ip cache flow
101
Advertisement
Table of Contents
