Default-Lsa - Juniper JUNOS OS 10.3 - SOFTWARE Manual

default-lsa

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
default-lsa {
default-metric metric;
metric-type type;
type-7;
}
[edit logical-systems logical-system-name protocols (ospf | ospf3) area area-id nssa],
[edit logical-systems logical-system-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id nssa],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
(ospf | ospf3) area area-id nssa],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id nssa],
[edit protocols (ospf | ospf3) area area-id nssa],
[edit protocols ospf3 realm (ipv4-unicast | ipv4-multicast | ipv6-multicast) area area-id
nssa],
[edit routing-instances routing-instance-name protocols (ospf | ospf3) area area-id nssa],
[edit routing-instances routing-instance-name protocols ospf3 realm (ipv4-unicast |
ipv4-multicast | ipv6-multicast) area area-id nssa]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Support for the statement introduced in Junos OS Release 9.2.
realm
Support for the statement introduced in Junos OS Release 9.2 for EX Series
realm
switches.
On area border routers only, for an NSSA, inject a default LSA with a specified metric
value into the area. The default route matches any destination that is not explicitly
reachable from within the area.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
nssa on page 1895
stub on page 1972
Configuring OSPF Areas
Chapter 73: Configuration Statements for Layer 3 Protocols
1769