Disable (Is-Is) - Juniper JUNOS OS 10.3 - SOFTWARE Manual

disable (IS-IS)

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
disable;
[edit logical-systems logical-system-name protocols isis],
[edit logical-systems logical-system-name protocols isis interface interface-name],
[edit logical-systems logical-system-name protocols isis interface interface-namelevel
level-number],
[edit logical-systems logical-system-name protocols isis traffic-engineering],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name
protocols isis interface interface-name level level-number],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
isis traffic-engineering],
[edit protocols isis],
[edit protocols isis interface interface-name],
[edit protocols isis interface interface-name level level-number],
[edit protocols isis traffic-engineering],
[edit routing-instances routing-instance-name protocols isis],
[edit routing-instances routing-instance-name protocols isis interface interface-name],
[edit routing-instances routing-instance-name protocols isis interface interface-name level
level-number],
[edit routing-instances routing-instance-name protocols isis traffic-engineering]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Disable IS-IS on the routing device, on an interface, or on a level. At the
hierarchy level, disable IS-IS support for traffic engineering.
isis traffic-engineering]
Enabling IS-IS on an interface (by including the
or the
isis] [edit routing-instances routing-instance-name protocols isis]
disabling it (by including the
interface (by including the
IS-IS is enabled for Level 1 and Level 2 routers on all interfaces on which an International
Organization for Standardization (ISO) protocol family is enabled.
IS-IS support for traffic engineering is enabled.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
IS-IS Overview
Configuring IS-IS Traffic Engineering Attributes
Disabling IS-IS
Chapter 73: Configuration Statements for Layer 3 Protocols
interface
disable statement), and not actually having IS-IS run on an
statement) are mutually exclusive states.
passive
[edit protocols
statement at the
[edit protocols
hierarchy level),
1773