Discard - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

discard

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
1776
®
OS for EX Series Ethernet Switches, Release 10.3
discard;
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options (aggregate | generate) (defaults | route)],
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options rib routing-table-name (aggregate | generate) (defaults | route)],
[edit logical-systems logical-system-name routing-options (aggregate | generate) (defaults |
route)],
[edit logical-systems logical-system-name routing-options rib routing-table-name (aggregate |
generate) (defaults | route)],
[edit routing-instances routing-instance-name routing-options (aggregate | generate)
(defaults | route)],
[edit routing-instances routing-instance-name routing-options rib routing-table-name
(aggregate | generate) (defaults | route)],
[edit routing-options (aggregate | generate) (defaults | route)],
[edit routing-options rib routing-table-name (aggregate | generate) (defaults | route)]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Do not forward packets addressed to this destination. Instead, drop the packets, do not
send ICMP unreachable messages to the packets' originators, and install a reject route
for this destination into the routing table.
When an aggregate route becomes active, it is installed in the routing table with a reject
next hop, which means that ICMP unreachable messages are sent.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
aggregate on page 1716
generate on page 1793
Configuring Aggregate Routes
Configuring Generated Routes
Copyright © 2010, Juniper Networks, Inc.