Juniper JUNOS OS 10.3 - SOFTWARE Manual page 1883

Hierarchy Level
Release Information
Description
Copyright © 2010, Juniper Networks, Inc.
maximum number;
teardown <percentage> <idle-timeout (forever | minutes)>;
}
<loops number>;
prefix-limit {
maximum number;
teardown <percentage> <idle-timeout (forever | minutes)>;
}
rib-group group-name
}
}
}
[edit logical-systems logical-system-name protocols bgp],
[edit logical-systems logical-system-name protocols bgp group group-name],
[edit logical-systems logical-system-name protocols bgp group group-name neighbor address],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
bgp group group-name neighbor address],
[edit protocols bgp],
[edit protocols bgp group group-name],
[edit protocols bgp group group-name neighbor address],
[edit routing-instances routing-instance-name protocols bgp],
[edit routing-instances routing-instance-name protocols bgp group group-name],
[edit routing-instances routing-instance-name protocols bgp group group-name
neighbor address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
inet-mvpn and inet6-mpvn
statement introduced in Junos OS Release 9.4.
inet-mdt
Support for the loops statement introduced in Junos OS Release 9.6.
Enable multiprotocol BGP (MP-BGP) by configuring BGP to carry network layer
reachability information (NLRI) for address families other than unicast IPv4, to specify
MP-BGP to carry NLRI for the IPv6 address family, or to carry NLRI for VPNs.
Chapter 73: Configuration Statements for Layer 3 Protocols
statements introduced in Junos OS Release 8.4.
1787