Displaying Information Of An Aggregate Interface; Setting Lacp Priority - 3Com Baseline 2928 PWR Plus User Manual

Displaying Information of an Aggregate Interface

Select Network > Link Aggregation from the navigation tree. The Summary tab is displayed by
default, as shown in
Figure 1-2 Display information of an aggregate interface
Table 1-5 describes the fields on the Summary tab.
Table 1-5 Fields on the Summary tab
Field
Aggregation interface
Link Type
Partner ID
Selected Ports
Standby Ports
Return to Static aggregation group configuration task
Return to Dynamic aggregation group configuration task

Setting LACP Priority

Select Network > LACP from the navigation tree, and then click Setup to enter the page shown in
Figure 1-3.
Figure 1-2.
Type and ID of the aggregate interface
Bridge-Aggregation indicates a Layer 2 aggregate interface
Type of the aggregate interface, which can be static or dynamic
ID of the remote device, including its LACP priority and MAC address
Number of selected ports in each link aggregation group (Only selected
ports can transmit and receive user data)
Number of unselected ports in each link aggregation group (Unselected
ports cannot transmit or receive user data)
Description
list.
list.
1-7