Xerox ColorQube 9303 Series Service Manual page 1562

Table 17 Input codes 94
Code Displayed Name Description
94-105 Cleaning unit home IME cleaning unit home sensor
sensor
Output Codes
Table 18 Output codes 05
Code Displayed Name Description
05-062 DADH feed clutch DADH feed clutch (CL05-062)
05-074 DADH feed motor DADH feed motor (MOT05-074)
05-098 DADH nudger DADH nudger motor (MOT05-098) On/off. 10 seconds time out
motor
05-099 DADH CVT motor DADH CVT stepper motor
(MOT05-099)
05-100 DADH duplex DADH duplex/exit solenoid
solenoid (SOL05-101)
05-101 DADH Active Hot- DADH Active Hotline. Required to
line keep alive until DADH Hotline
Detect sensor can be run.
Table 19 Output codes 10
Code Displayed Name Description
10-018 Post Transfix Post transfix motor M4 (MOT10-
motor (M4) 018)
10-019 Front Transfix Front Transfix Motor (MOT10-019) On/off.
Motor
10-020 Rear Transfix Rear Transfix Motor (MOT10-020) On/off.
Motor
10-021 Stripper Solenoid Stripper Solenoid (SOL10-021)
10-022 Stripper Jam Stripper Jam Clearance LED
Clearance LED
10-023 Strip Gate Latch Strip Gate Latch
10-024 Transfix Front and Transfix Front and Back
Back
10-025 Strip Gate Unlatch Strip Gate Unlatch
General Procedures/Information
dC330
General Code
High/low 12-045 SU1 motor backward
General
On/off. Normally linked with
12-056 SetCamp SolenoidOn
feed motor. 30 seconds time-
out.
12-059 Elevator motor up
On/off. 90 seconds timeout
12-060 Elevator motor down
On/off. 90 seconds timeout
On/off. 90 seconds timeout 12-223 Transport Motor 1
High = Active. 90 seconds
time out 12-224 Transport Motor 2
12-225 Exit Diverter Solenoid
General
12-226 Front Tamper Motor
On/off.
12-227 Rear Tamper Motor
12-228 Front Tamper Motor
On/off.
12-229 Rear Tamper Motor
On/off.
12-230 Tampers to A4LEF
On/off.
On/off.
12-231 Tampers to 8.5x11LEF Move the LCSS tampers to 8.5"x11"
On/off.
12-232 Tamper Motor Cycle
February 2013
6-270
Table 20 Output codes 12
Displayed Name Description
HVF/LCSS Staple unit 1 motor reverse
(MOT12-045)
CAUTION
Do not run the following codes
together: 12-045, 12-233, 12-236, 12-
242, 12-244, 12-249, 12-250. Run-
ning these codes at the same time can
cause damage to the machine.
HVF SetClamp SolenoidOn (SOL12-
056)
HVF/LCSS Elevator motor up
HVF/LCSS Elevator motor down
Runs the LCSS transport Motor 1, and
HVF transport motor 1A and Transport
motor 1B (MOT12-223)
Runs the LCSS, and HVF transport
motor 2 (MOT12-224)
Runs the LCSS, HVF exit diverter gate
solenoid and HVF BM upper diverter
solenoid (SOL12-225)
Runs the LCSS and HVF front tamper
Home motor (MOT12-227) to the home posi-
tion.
Runs the LCSS and HVF rear tamper
Home motor (MOT12-228) to home position
Runs the LCSS and HVF front tamper
Move motor (MOT12-226) move inbound.
Runs the LCSS and HVF rear tamper
Move motor (MOT12-227) move inbound.
Moves the LCSS tampers to A4LEF
position.
LEF position.
Cycles the LCSS tampers in and out
until time-out or stop.
General
On/off. 110 millisec-
onds time out.
On/off. 100 millisec-
onds time out.
On/off.
500miliseconds tim-
eout.
On/off.
500miliseconds tim-
eout.
On/off. 90 seconds
time out
On/off. 90 seconds
time out
On/off. 5 seconds
time out
On/off. 5 seconds
time-out
On/off. 5 seconds
time out
On/off. 5 seconds
time out
On/off. 5 seconds
time out
On/off. 5 seconds
time out
On/off. 5 seconds
time out
On/off. 90 seconds
time out
ColorQube® 9303 Family