OSPF C
OMMANDS
-
SHOW IP OSPF BORDER
ROUTERS
show ip ospf border-routers
Overview
Use this command to display the ABRs and ASBRs for all OSPF instances. Include
the process ID parameter with this command to view data about specified
instances.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip ospf border-routers
Syntax
show ip ospf <process-id> border-routers
Mode
User Exec and Privileged Exec
Output
Figure 26-3: Example output from the show ip ospf border-routers command
C613-50100-01 REV C
Parameter
Description
<process-id>
<0-65535> The ID of the router process for which information will
be displayed.
OSPF process 1 internal Routing Table
Codes: i - Intra-area route, I - Inter-area route
i 10.15.0.1 [10] via 10.10.0.1, vlan2, ASBR, Area 0.0.0.0
i 172.16.10.1 [10] via 10.10.11.50, vlan3, ABR, ASBR, Area
0.0.0.0
Command Reference for x930 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
"Getting Started
Guide.
1024