Show Ip Ospf Border-Routers - Allied Telesis x600-24Ts Software Reference Manual

OSPF Commands

show ip ospf border-routers

Use this command to display the ABRs and ASBRs for all OSPF instances.
Include the process ID parameter with this command to view data about specified instances.
To modify the lines displayed, use the | (output modifier token) ; to save the output to a file, use
the > output redirection token.
Syntax
show ip ospf border-routers
show ip ospf <process-id> border-routers
Parameter
<process_id>
Exec mode and Privileged Exec mode
Mode
Figure 36-4: Example output from the
Output
To display the ABRs and ASBRs for all OSPF instances, use the command:
Examples
To display the ABRs and ASBRs for the specific OSPF instance "721", use the command:
36.58
Description
<0-65535> The ID of the router process for which information will be
displayed.
OSPF process 1 internal Routing Table
Codes: i - Intra-area route, I - Inter-area route
i 10.15.0.1 [10] via 10.10.0.1,VLAN1, ASBR, Area 0.0.0.0
i 172.16.10.1 [10] via 10.10.11.50, VLAN2, ABR, ASBR, Area
0.0.0.0
awplus# show ip ospf border-routers
awplus# show ip ospf 721 border-routers
Software Reference for x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
show ip ospf border-routers command
C613-50006-01 REV B