Troubleshooting; Flowchart To Remedy The Troubles - Renesas R0E3308B0EPB00 User Manual

R0E3308B0EPB00 User's Manual

5. Troubleshooting

This chapter describes how to troubleshoot when this product does not work properly.

5.1 Flowchart to Remedy the Troubles

Figure 5.1 shows the flowchart to remedy the troubles from when power to the emulator is activated until the emulator
debugger starts up. Check this while the user system is disconnected. For the latest FAQs visit the Renesas Tools Homepage.
Turning on emulator
Front panel LED
of emulator
Init dialog box of emulator
debugger displayed
EMEM dialog box of
emulator debugger
Program window of emulator
debugger displayed
Emulator debugger startup completed
Figure 5.1 Flowchart to remedy the troubles
R20UT0210EJ0200 Rev.2.00
Sep 16, 2010
http://www.renesas.com/tools
Not normal
Normal 1. Check connection of the power supply cable.
2. Check that the power is properly supplied to the user system.
Not normal/Error displayed
1. Check the operating environment etc. of the emulator debugger.
Normal
See the user
2. Reinstall the emulator debugger.
Not normal/Error displayed
Normal
"
See
Error displayed
Normal
"
See 2.5 Connecting the Power Supply for the Emulator
"
See 2.6 Turning ON the Power
'
s manual of the emulator debugger.
5.2 (2) EMEM Dialog Box Does Not Appear at Debugger Startup
"
See 5.2 (3) Errors Occur at Debugger Startup
5. Troubleshooting
"
.
"
.
"
"
.
Page 88 of 98
.