Table of Contents
Advertisement
M3028BT2-CPE User's Manual
5. Troubleshooting
This chapter describes how to troubleshoot when this product does not work properly.
5.1 Flowchart to Remedy the Troubles
Figure 5.1 shows the flowchart to remedy the troubles from when power to the emulator is activated until the emulator
debugger starts up. Check this while the user system is disconnected. For the latest FAQs visit the Renesas Tools Homepage.
Turning on emulator
Front panel LED
of emulator
Init dialog box of
emulator debugger displayed
MCU Setting dialog box
of emulator debugger displayed
Editor ( source ) window of
emulator debugger displayed
Emulator debugger startup completed
Figure 5.1 Flowchart to remedy the troubles
REJ10J1457-0300 Rev.3.00 July 22, 2009
http://www.renesas.com/tools
1.
Normal
Not normal / Error displayed
1.
Normal
2.
Not normal / Error displayed
See "5.2 (2) MCU Setting Dialog Box Does Not Appear at Debugger Startup."
Normal
See "5.2 (3) Errors Occur at Debugger Startup."
Normal
Not normal
Check connection of the power supply cable.
"
See,
2.4 Connecting the Power Supply for Emulator.
Check the operating environment etc.of the emulator debugger.
'
See the user
s manual of the emulator debugger.
Reinstall the emulator debugger.
Error displayed
5. Troubleshooting
"
Page 82 of 90
Advertisement
Table of Contents
