Switching Between Full Screen Video And The Home Screen; Showing, Moving, And Turning Off The Pip - Polycom VSX 8800 Booklet

Switching Between Full Screen Video and the Home Screen

Showing, Moving, and Turning Off the PIP

To delete all presets:
1. If a call is connected, press
source.
2. Press Preset on the remote control.
3. Press Delete to delete all presets.
Before the call connects, you see the near video in a small window on the
Place a Call (home) screen. When the call connects, the system
automatically shows the video in the whole screen. You can switch back to
the Place a Call screen during a call, for example, if you need to adjust a
user setting, and your system is configured to allow you to do so.
To see the video in the full screen:
>>
Press Near on the remote control.
To see the Place a Call screen:
>>
Press Home on the remote control.
To show, move, or turn off the PIP during a call:
Press PIP on the remote control to display the PIP on screen.
While the PIP has a yellow border, press
it to different corners of the screen.
After a brief pause, the PIP border turns blue. Then, press
turn the PIP off.
To swap the views shown in the PIP and the main screen:
1. If the PIP is not showing, press
display the PIP on screen.
2. Press Camera and select the
During calls using a single monitor and the Dual Monitor Emulation feature
(split-screen viewing), without content, you can use the PIP button to scroll
through the following screen layouts:
1. Near and far sites, same size, side by side
2. Far site big, near site small
3. Near site big, far site small
4. Near site, full screen
5. Far site, full screen
Near to choose a near-site video
PIP repeatedly to move
PIP on the remote control to
Swap PIP icon.
PIP to
5