NauticaRS Release 4.1 Reference Guide
Modifying Filters
ip# mod fi wat1
filter/wat1#
8-12
To edit an existing filter, use the following syntax at the
prompt:
mod fi name
A brief description of these attributes follows. For more specific
information, click the relevant parameter name.
mod
fi
Name
A-IPAddr
A-MLength
A-Port
B-IPAddr
B-MLength
B-Port
Using
Figure 8-2
following would be typed:
Note:
If your terminal session supports cut and paste facilities,
it is easier to list the filters first (
then copy and paste the relevant filter to a new command line
for editing. (If you do this, remember to use the
the start of the line to move you into the FIlter context.)
Once modified, the prompt will change to show that you are
editing the filter object:
MODify verb
FIlter context
A name for the filter
First IP address
Subnet mask for first IP address
First port number (optional)
Second IP address
Subnet mask for second IP address
Second port number (optional)
as an example, to modify the listed filter, the
lso -l
at the
prompt) and
ip#
command at
fi
117237-C Rev. A
ip#