Bay Networks Nautica 200 Reference Manual page 145

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-C Rev. A
Note: PPTP cannot be established to a Nautica path.
BandWidthMode
ba
0
Ondemand, Permanent
This specifies the operating and backup mode for the
path.
OnDemand is used for switched and leased-line circuits
only.
Permanent specified here means that a backup call will
last as long as the leased-line circuit is down.
Min-BandWidth
min-b
0
An integer from 0 to 4294967295
Values entered here cause the device to make extra
switched calls until the Min-Bandwidth is met for the
path.
Multiples of 64000 should be used here for ISDN
connection. Only one end of the path should have
Min-Bandwidth set in order to avoid call collisions.
Working with Paths
4-33