Bay Networks Nautica 200 Reference Manual page 193

Instructions:
Parameter:
Default:
Options:
Function:
117237-C Rev. A
There are several values for this parameter:
• On-Demand-Calls: If a data call is using two lines
to the same number (one of the lines is used for
extra bandwidth), the second line will be dropped to
make way for the voice call. This happens only if
the initial data link is not lost by bumping the extra
line.
• On-Demand-Calls-&-CLI: If there are two lines
up to the same destination and one of those lines is
an extra bandwidth line, the additional line will be
dropped if it matches a Calling Line Identifier (CLI)
number as specified in the CLI1bump
and CLI2bump
• On-CLI: If the data calls match a number specified
in the CLI 1bump
7-12) parameters, the data call will be dropped to
make way for the voice call.
• Never: A data call will never be dropped to make
way for a voice call.
• Always: A data call will always be dropped to make
way for a voice call.
CLI1bump
(Blank)
A valid telephone number
Enter a telephone number that can be used with the
Bumpdata parameter
data call should be dropped for a voice call.
Controlling Router Devices
(page 7-12) parameters.
(page 7-11) and CLI 2bump
(page 7-10) to evaluate whether a
(page 7-11)
(page
7-11