Bay Networks Nautica 200 Reference Manual page 428
Nortel nautica 200: reference guide
Hide thumbs
Also See for Nautica 200:
- Reference manual (642 pages) ,
- Release note (38 pages) ,
- Installation manual (23 pages)
Table of Contents
Advertisement
NauticaRS Release 4.1 Reference Guide
Verb:
MTC:
Function:
Example:
box# reboot
Are you sure you wish to REBOOT?
Press y/Y to confirm
y
Verb:
MTC:
Function:
Example:
box# bat
Batch mode
box# new pa ppp/wat2
box# isdn-n 1/u192.168.2.2
17-24
Reboot
reboot
Typing the REBOOT command makes the unit reset
itself. Having confirmed the action, any configuration
changes not saved will be lost as the unit resets itself and
the stored configuration (last saved) is loaded.
The following is an example of reboot:
For the Nautica 200, the LED on the front of the unit
flashes amber and then changes to green. Once the green
LED appears, press any key and you are returned to the
Password screen.
Remove
remove
If you have batch mode
do not wish to commit
have typed, remove will remove all the commands
entered while in batch mode.
Note:
The REMOVE verb also ends batch mode.
The following is an example of batch transactions
cancelled using the remove verb:
(page
17-3) turned on and you
(page
17-8) the commands you
117237-C Rev. A
Advertisement
Table of Contents
