NauticaRS Release 4.1 Reference Guide
8-18
•
!ICMP The exclamation mark here means NOT.
With this option set, information passed between
these IP addresses will only be matched if this
protocol is NOT used.
Note:
IF ICMP is used as the protocol, the port option is not
supported. Leave port numbers at 0 (off).
•
TCP (Transmission Control Protocol) With this
option set, information passed between these IP
addresses will only be matched if this protocol is
used. As an example, TELNET uses TCP.
•
!TCP The exclamation mark here means NOT.
With this option set, information passed between
these IP addresses will only be matched if this
protocol is NOT used.
•
UDP (User Datagram Protocol) With this option
set, information passed between these IP addresses
will only be accepted if this protocol is used. As an
example, SNMP uses UDP.
•
!UDP The exclamation mark here means NOT.
With this option set, information passed between
these IP addresses will only be accepted if this
protocol is NOT used.
•
None Not looking for a match against a specific
protocol.
117237-C Rev. A