Parameter:
MTC:
Default:
Options:
Function:
Parameter:
MTC:
Default:
Options:
Function:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-C Rev. A
Advanced-Manager
ad
No
No, Yes
The Advanced Manager allows extra path options to be
set for OSPF and metrics. The extra parameters appear
in the path objects.
HTML-Manager
ht
No
No, Yes
Allows the unit to be accessed (Read Only) by a web
browser
PPTP-Enable
ppt
No
No, Yes
Turning this option on (Yes) will allow PPTP (Point to
Point Tunnelling Protocol) operation.
If this option is enabled, then PPTP can also be enabled
in a PPP path (ISDN-Number-1 has to be set to the IP
address of the originator/receiver of the PPTP Tunnel
[page 1-21]) or as an ISDN Multi Subscriber Number
(MSN) to provide the telephone number of the PPTP
host and IP number of the PPTP Tunnel terminator.
See page 1-21 for more general information on PPTP as
well as the MSN section of the ISDN chapter on
page 10-12.
Modifying System Settings
5-11