Bay Networks Nautica 200 Reference Manual page 129

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-C Rev. A
BandWidthMode
ba
0
Ondemand, Permanent
This specifies the operating and backup mode for the
path. Set this option to OnDemand for switched circuit
and leased circuit only paths.
If a leased circuit path uses switched circuits for extra
bandwidth, this option specifies back up mode. If set to
OnDemand, and a leased circuit fails, a backup call is
made only when data is to be routed over the path.
Permanent specified here means that a backup call will
last as long as the leased-line circuit is down.
Min-BandWidth
min-b
0
An integer from 0 to 4294967295
The minimum bandwidth to be allocated to this path. A
value of 0 initially uses the single channel capacity.
Other values cause the unit to make extra switched calls
until Min-Bandwidth is met for this path.
Multiples of 64000 should be used here for ISDN
connection. Only one end of the path should have
Min-Bandwidth set in order to avoid call collisions.
Caution: Only change the Min-Bandwidth parameter from the
default if Bandwidth Mode is set to Permanent.
Working with Paths
4-17