Path Types; Ethernet Paths - Bay Networks Nautica 200 Reference Manual

Path Types

Ethernet Paths

box# mod pa eth/lan01
path/eth/lan01#
117237-C Rev. A
A path is made up of two variables, its
type shows the protocol that is used to send information along the
path. Its name identifies the path in the lists.
Path Types. Column 3 in the table shows on which Nautica
products these paths can or cannot be used.
Click on the path type description for which you require
information.
Table 4-1.
Path Type Description
ETH Ethernet Paths
PPP PPP Paths
Point)
NAU Nautica Paths
FRR Frame Relay Paths
(RFC1490)
The Ethernet Path (
the local LAN. There can only be one Ethernet path per Nautica
unit. Users can edit this path by using the following syntax:
Where mod is the MODify verb (page 17-20),
the path context,
eth
name assigned to this path by the unit.
After it is modified, the unit moves into the path object and the
prompt reflects this:
Path Types
(LAN)
(Point to
) is system generated and points to
eth/lan01
is the type of path (ethernet) and
Working with Paths
and its
Type Name
Table 4-1 shows the
Product
All Nautica Products
All Nautica Products
Not Nautica 200
Not Nautica 200
pa moves you into
lan01
. A path
is the
4-5