Bay Networks Nautica 200 Reference Manual page 361

Parameter:
Default:
Options:
Function:
Instructions:
Parameter:
Default:
Options:
Function:
Instructions:
Parameter:
Default:
Options:
Function:
Instructions:
117237-C Rev. A
Challenge-Timeout
60 seconds
A time in seconds from 0 to 4294967
Specifies the time in seconds after which a CHAP
challenge will be made by the unit. The time entered
here represents the amount of time after which a CHAP
challenge may be sent to a remote unit on active PPP
connections.
Enter a time value in seconds.
MLink-Enable
Yes
Yes, No
Enables or disable Multilink PPP (MPPP)
With this option enabled, when the threshold limits are
reached for a path (see page 4-17), MPPP will bring up a
second link for additional bandwidth.
This attribute can be used in conjunction with the
BACP-Enable attribute.
Short-Seq-Enable
Yes
Yes, No
Specifies whether the link will use short or long
sequence numbers.
Short sequence numbers allow more data to be carried
per packet than long sequence numbers. This option is
useful when using long delay links, for example satellite
links, where the links can lose synchronization.
Defining PPP Profiles
12-11