Bay Networks Nautica 200 Reference Manual page 150

NauticaRS Release 4.1 Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
4-38
OSPF-Support
ospf-s
none
none, ospf2
To allow or disallow OSPF
If OSPF is to be used on this router then change this
parameter to OSPF2. For a description of OSPF refer to
page 1-17. To setup OSPF, refer to page 8-27.
IPX-RIP-SAP-Direction
ipx-r
sendandlisten
sendandlisten, none, sendonly, listenonly
The direction RIP and SAP will operate on this path for
IPX calls.
The values here are as follows:
• SendAndListen: RIP and SAPs are received and
sent along this path.
• SendOnly: RIP and SAPs are sent along this path
but not received.
• ListenOnly: RIP and SAPs are received along this
path, but are not sent.
• None: RIP and SAPs are not sent or received along
this path.
117237-C Rev. A