Bay Networks Nautica 200 Reference Manual page 356

NauticaRS Release 4.1 Reference Guide
box# mod pa ppp/wat1
path/ppp/wat1#ppp-p system
[Save] path/ppp/wat1#
box# mod dev bri/isdn-ta01
device/bri/isdn-ta01#ppp-p hoffice
[Save] device/bri/isdn-ta01#
12-6
To use a custom PPP profile for outgoing calls, the path
PPP-Profile parameter must be changed to reflect the PPP-Profile
being used. For example, if you created a custom Profile called
System and this is to be used for outgoing calls on a PPP path
called WAT1,type the following command to change the profile
name on the path:
To use a custom PPP profile for incoming calls, the PPP profile
on the relevant devices needs to be changed to reflect the
PPP-Profile being used. For example, if you created a custom
profile called HOffice and this is to be used on all incoming calls
on the ISDN BRI, type the following command to change the
profile on the BRI device:
117237-C Rev. A