Displaying Path Information; Listing Paths - Bay Networks Nautica 200 Reference Manual
Nortel nautica 200: reference guide
Hide thumbs
Also See for Nautica 200:
- Reference manual (642 pages) ,
- Release note (38 pages) ,
- Installation manual (23 pages)
Table of Contents
Advertisement
NauticaRS Release 4.1 Reference Guide
Displaying Path Information
Listing Paths
box# lso -l
device/box/MARLIN
device/eth/LAN01
device/wan/WAN01
device/bri/ISDN-TA01
device/isdn/ISDN01
device/isdn/ISDN02
device/pri/ISDN-PRI01
path/eth/LAN01
path/nau/RemoteNautica
wins/Remote_Server/group/static
box#
4-2
Paths contain information about a destination host or network.
When a unit is first configured it will have a default path of
. This path points to the local network. If Quick Setup or
eth/lan01
Nautica Wizard were used to set up the router there will be
another path called RemotePPP or RemoteNautica.
Note:
The RemotePPP and RemoteNautica names may change
once the unit makes the first call to these paths after setup is
complete.
To list all the paths setup on the unit, at the box# prompt, use the
verb:
lso -l
A list of all DEVices, PAths and WIns is displayed:
Note:
This list has been deliberately shortened.
117237-C Rev. A
Advertisement
Table of Contents
