Bay Networks Nautica 200 Reference Manual page 70

NauticaRS Release 4.1 Reference Guide
bcc> %taprog% n
c:> isdnprog filename
2-12
7. Downloading router code using Nautica Wizard
After downloading the new bootloader, reboot the Marlin.
From a Windows 95 or NT workstation, use Nautica Wizard
to download the new router code.
a. Select the unit to be configured in the Nautica Wizard
window by clicking on it once
b. Select File > Download New Router Software
c. Follow the prompts on the screen to load the new code.
The file to load is MARLIN.BAY and is located in the
default Nautica Wizard directory (usually Program
Files/Bay Networks/Nautica Wizard).
8. Load new ISDN module code
If your Marlin has been working with no errors, then there is
no need to upgrade to the new ISDN module code. If you
have been experiencing problems, or are preparing a unit for
installation at a customer site, it is recommended that you
upgrade to the new ISDN code.
With the Marlin running the new router code, connect to the
Manager port using the adaptor and cable provided, and issue
the following command from the BCC prompt to put the
ISDN module into bootmode:
Where is replaced by a digit as per the following table:
n
Number Description
1 BRI module on the Baseboard
2 1st BRI module on the Expansion card, or a PRI
Expansion card
3 2nd BRI module on the Expansion card
Execute the following command from the DOS prompt:
117237-C Rev. A