Creating Custom Ppp Profiles - Bay Networks Nautica 200 Reference Manual

Creating Custom PPP Profiles

ppp# new pr custom
[Save] profile/custom#
profile/custom# i
name "custom"
pap-enable yes
chap-enable yes
auth-enable incoming
mru 1500
restart-timeout 1
echo-timeout 6
challenge-timeout 60
mlink-enable yes
short-seq-enable yes
frag-enable yes
encap-enable no
bacp-enable yes
profile/custom#
117237-C Rev. A
The default profiles work in most situations. However, if you
need to have more specific security and bandwidth allocation you
can create your own custom PPP profiles and assign them as
normal. To create your own profile, in the
following syntax:
new pr name
where is the NEW verb,
new
is the name you are assigning to this profile.
name
For example, to create a new profile called 'custom', type the
following command at the
BCC moves you into the new profile object and prompts you to
save the changes:
To display the attributes for the new profile, type
prompt; a list of attributes appears:
Defining PPP Profiles
ppp#
is the MTC for PRofile and
pr
prompt:
ppp#
context use the
Info at the
12-5