Bay Networks Nautica 200 Reference Manual page 342

NauticaRS Release 4.1 Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
11-4
Profnum
pr
Set at time of creation
A value from 1 to 5
Specifies the profile number of the filter group. Nautica
Wizard allows you to have up to five filter groups, and
each group can have up to 99 filters.
Enter a numeric ID for the group of frame filters.
ID
id
Set at time of creation
A value from 0 to 99.
Specifies the number of a filter within a profile. Using
profile numbers and IDs allows you to group filters
together and have all the filters that are enabled in a
group run consecutively using the And Next parameter.
Enter a number from 0 to 99.
Length
le
0
A valid length in bytes
Specifies the length (from the offset) to be matched.
Enter a valid length in bytes. Using this parameter
allows you to specify what portion of the packet needs to
be matched for the filter to work.
117237-C Rev. A