Bay Networks Nautica 200 Reference Manual page 409

Verb:
MTC:
Function:
Instructions:
Example:
box# bootmode
Are you sure you wish to ERASE ALL SOFTWARE and REBOOT?
Press y/Y to confirm
Entering BootMode now
ü
CLAMNET LOADER 1.4
Type R - Sets LED to RED
G - Sets LED to GREEN
A - Sets LED to AMBER
O - Sets LED to OFF
K - Erase Config Sector
P - Erase Program Sectors
B - Reboot unit
>
117237-C Rev. A
Bootmode
bootmode
BOOTMODE will erase the current software and return
the user of the system to a state known as boot mode.
Boot mode allows the user to load new software into the
unit.
Warning: This command is dangerous. If bootmode is
executed, the router is not functional until new code is
downloaded. Be sure you have the means to download new
router code before you run this command.
If BOOTMODE is typed at the BCC prompt, the user
will be prompted to confirm the action. Answering
to this question will carry out the BOOTMODE
function. Answering
command.
The following shows how the BOOTMODE verb is
executed:
Command-Line Verbs
to this option will cancel the
No
Yes
17-5