Fractional Mode - Bay Networks Nautica 200 Reference Manual

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
device/pri/ISDN-PRI01#
device/pri/ISDN-PRI01# mode frac
117237-C Rev. A
BCMapMode
bcm
onetoone
onetoone, none, alltoone, unstructured, configured
This attribute is not relevant to working in standard PRI
mode.
For information on this attribute, refer to
BChan Num/Frac
No MTC
Valid B channel to fractional mapping.
A valid B channel to fractional mapping.
This attribute is not relevant to standard PRI mode
operation.
For more information on this attribute, refer to
7-31.

Fractional Mode

To edit a PRI device, use the following syntax:
mod dev pri/isdn-01
where is the MTC for the MODify verb,
mod
DEVice, is the device type and
pri
PRI device being edited.
The BCC prompt changes to show that you are editing the PRI
device:
To change the PRI card from PRI mode to Fractional mode, at the
PRI prompt, type the following:
Controlling Router Devices
page
is the context
dev
is the number of the
isdn-01
7-31.
page
7-31