Bay Networks Nautica 200 Reference Manual page 240

NauticaRS Release 4.1 Reference Guide
Parameter:
MTC:
Default:
Options:
Function:
Parameter:
MTC:
Default:
Options:
Function:
Parameter:
MTC:
Default:
Options:
Function:
7-58
State
st
enabled
enabled, disabled
To enable or disable the PVC
DLCI
dl
0
A valid DLCI number
The number entered by the user here is the DLCI of this
PVC on the Frame Relay network. The correct DLCI
will be supplied by the network provider. The
autolearned DLCI number is shown here.
PathType
patht
nau
nau, ppp, eth, frr
The operating mode of the path over this PVC. The
options here are NAU (Nautica Router), PPP (PPP
Router), ETH (Ethernet Router) and FRR (Frame Relay
- RFC1490).
Note: There is no existing standard for operating PPP over a
Frame Relay connection. Interoperability with non-Nautica
routers should be confined to RFC1490 mode only.
117237-C Rev. A