Bay Networks Nautica 200 Reference Manual page 157

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-C Rev. A
OSPF-Support
ospf-s
none
none, ospf2
To allow or disallow OSPF
If OSPF is to be used on this router then change this
parameter to OSPF2. For a description of OSPF refer to
page 1-17. To setup OSPF, refer to page 8-27.
IPX-RIP-SAP-Direction
ipx-r
sendandlisten
sendandlisten, none, sendonly, listenonly
Specifies IPX RIP and SAP direction on this path.
For more information on this attribute, refer to
4-38.
Bridging
bridgi
no
no, yes
Allow or disallow bridging on the router
Only change this parameter to yes if bridging is to be
supported on this router. For more information on
Bridging, refer to page 1-24.
Working with Paths
page
4-45