Parameter:
Default:
Options:
Function:
Instructions:
Parameter:
Default:
Options:
Function:
Instructions:
117237-C Rev. A
Note:
If you are unsure whether the remote units support PAP
or CHAP, set both PAP-Enable and CHAP-Enable to
When authentication is negotiated, if one option is rejected by
the remote unit, the other option is used instead.
Auth-Enable
Incoming
Incoming, None, Bothway
Specifies on which type of calls PAP/CHAP
authentication is to take place.
Select an option:
•
Incoming: Authentication is only used on incoming
calls.
•
None: No authentication is requested by the unit.
•
Bothway: Authentication is used on both incoming
and outgoing calls.
Maximum Received Unit (MRU)
1500 bytes
A value in bytes from 0 to 1580
The largest packet size in bytes
This is the size of the largest packet, in bytes, that the
Nautica router can receive. This value must match the
value specified by the remote unit.
Defining PPP Profiles
.
Yes
12-9