Frame Relay Paths - Bay Networks Nautica 200 Reference Manual

Frame Relay Paths

box# new pa frr/name
box# mod pa frr/wat1
box# del pa frr/wat1
117237-C Rev. A
The attributes for a Frame Relay (RFC1490) are set in a similar
way to those for Ethernet, PPP and Nautica connections. To
create a new Frame Relay path, use the following Syntax:
where is the NEW verb (page 17-21),
new
PAth context,
frr
4-1) and is the user defined name for the path.
name
Note: Frame Relay paths are usually auto-learned by the router.
To edit an existing Frame Relay path, use the same syntax as
above, but replace the
MTC for the MODify verb (page 17-20). For example:
To remove an existing Frame Relay path from the unit, use the
same syntax, but replace the verb with the
MTC for the DELete verb (page 17-12). For example:
When you edit or create a Frame Relay path, BCC moves you
into the Frame Relay path object. Typing Info at this prompt lists
all the attributes for the object.
a Frame Relay path.
(Frame Relay Router) is the Path type
verb with the
new
Table 4-5
Working with Paths
moves you into the
pa
(Table
verb. is the
mod mod
verb. is the
del del
lists all the attributes for
4-41