Bay Networks Nautica 200 Reference Manual page 424

NauticaRS Release 4.1 Reference Guide
Verb:
MTC:
Function:
Example:
ip# mem
90592 Bytes Free Memory
ip#
Verb:
MTC:
Options:
Function:
box# pa ppp/wat12
[Save] path/ppp/wat12#
box# mod pa ppp/wat12
Modify fails 'ppp/wat12' does not exist
box#
17-20
Memory
mem
The Memory command displays the free memory of the
unit in bytes.
The following shows how much memory remains on a
unit:
Modify
mod
mod <configured object>
It is recommended that you use MODify when editing
objects because it warns you if you are modifying an
object in error. If you modify an object without using the
MOD verb, and that object does not exist, BCC will
create a new object of the type you specified.
For example, if you want to modify a path called WAT1,
but type the name incorrectly, a new path with the
incorrect name is created:
In this instance, the [
warning that you have created a new path.
Using the modify verb, however warns you that you
have made a mistake:
Save ] command is the only visual
117237-C Rev. A