Bay Networks Nautica 200 Reference Manual page 415

box# date 24/10/99 tuesday
Verb:
MTC:
Function:
Example:
box# defcon
Are you sure you wish to ERASE CONFIG and REBOOT? (y/n)
Press y/Y to confirm
y
Defaulting Config
Wait 10 seconds, then Press spacebar to continue
117237-C Rev. A
To change any of the options, type the word date,
followed by the correct date and then the option you
want to change. For example, to change the day of the
week to tuesday, the following is typed:
Note: The current date must always be typed regardless of
whether you are changing the day of the week or the time.
Defcon
defcon
DEFCON (Default Configuration) will erase the
configuration and reboot the unit. All options will be
returned to the manufacturer defaults.
Caution: This command is dangerous! There is no undo if it is
entered in error. Please ensure you really want to delete the
current configuration before using this command.
Entering defcon causes the following to appear:
Answering
the configuration and reboot. The LED on the front of
the Nautica 200 will flash amber; when it stays green
once more, hit the spacebar and you will be returned to
the initial login screen.
to the prompt will cause the unit to reset
Yes
Command-Line Verbs
17-11