Bay Networks Nautica 200 Reference Manual page 197

Parameter:
MTC:
Default:
Options:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-C Rev. A
Tei
tei
127
The Terminal Endpoint Identifier (TEI) must not be
altered unless the ISDN network supplier advises this.
An incorrect setting here may prevent use of the ISDN
line. A value of 127 allows automatic assignment of the
TEI on startup and this should not be amended.
Use-CLI
us
Info
Info, Auto, Force
Calling Line Identification (CLI) is a further level of
security that occurs before any other authentication
(PAP and CHAP).
Note: CLI only operates on incoming calls.
When the Nautica 200 receives a call, the calling switch
sends the ISDN number it is calling as part of its data.
This is the CLI number that is matched by this
parameter.
There are three CLI values that you can set, depending
on the level of security required.
• Info: With Info set, when a call comes in CLI is
ignored and the call passes straight to PAP/CHAP
authentication.
Controlling Router Devices
7-15