Bay Networks Nautica 200 Reference Manual page 165

Parameter:
MTC:
Default:
Options:
Function:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-C Rev. A
Password
pas
PASSWORD, unless changed by the user
A valid password up to 32 characters
If a new password has been added to the unit then the
password will be displayed here in encrypted format.
If a password has not yet been set, then the default
password PASSWORD will be shown here.
Entering a password will secure the entry to the unit via
the manager. This is the password that is entered on
entry to the unit.
Caution: Any password set on the router is case sensitive.
Mgr-Timeout
mg
300
A number of seconds from 0 to 4294967
If there has been no input from the Manager Terminal
after this time then the Manager session will be closed.
If the option here is set to 0 then the Manager Timeout is
turned off. If the Manager does close, changes made to
the unit's configuration will not be saved.
Caution: If the user intends to use the unit for long periods of
time, then it is advisable to set the option here to 0, or a more
specific time. 300 seconds may be too short.
Modifying System Settings
5-5