Parameter:
MTC:
Default:
Options:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:
Instructions:
117237-C Rev. A
IP-Filtering
ip-f
NoFiltering
NoFiltering, ForwardOnMatch, RejectOnMatch
This attribute has three values:
•
NoFiltering This is the default value and if selected
will turn filtering off. If you do need to filter IP
traffic, then use one of the other two options.
•
Reject on Filter Match will only allow frame types
that do not match a predefined filter into the Nautica
router. Any frames that match the filter will be
dropped (not forwarded by the unit).
•
Forward on Filter Match will only allow frame
types that match a predefined filter into the unit. All
other frames will be dropped.
For more information on creating filters, turn to page 8-11.
IP-Cache-Timeout
ip-c
998
A valid time in seconds from 0 to 4294967295
Sets the time limit for routes to be stored in the IP cache
If a route is stored in the IP cache, it will be removed if it
has not been used for longer than the time specified here.
Caution:
Any value below 30 seconds may cause excessive
overheads for the unit. 0 is not a valid configuration for this
parameter.
Modifying System Settings
5-7