Table 9-2. Ipx Route Attributes - Bay Networks Nautica 200 Reference Manual

NauticaRS Release 4.1 Reference Guide
Attribute
Hops
Ticks
Frame-Type
Parameter:
MTC:
Default:
Options:
Function:
Parameter:
MTC:
Default:
Options:
Function:
9-10
Table 9-2.
Allowable Options (Bold is Default)
the number of routers passed through
to reach this network.
The time in Ticks (1/18 seconds)
taken to reach this network.
8022, 8023, Ether, All
To change an Attribute, use the following syntax:
Attribute new_value
Where is the Attribute to be changed, and new-value is
Attribute
the new option for the attribute from the above table.
A description of the attributes follows:
Type
ty
s
s, t
The type of node as specified in the Route Node table at
the start of this section. Users can only MODify
and
Temporary
Net
net
A network number
A valid network 8 digit number
The Network number entered at the time the route was
created.
IPX Route Attributes
ROutes.
(continued)
MTC
HO
TI
FRA
Static
117237-C Rev. A